Vapor Giant GO 3
Prebuilt coil atomizer
23 mm
Diameter
55 mm
Length
61 g
Weight
The Vapor Giant GO 3 is a prebuilt coil atomizer with 8 optional coils.
Final assembly is done in Austria to ensure the highest quality. The design is based on the Vapor Giant Mini V4. The GO 3's prebuilt coil is equipped with Japanese organic cotton.
GO 3 tank coils
GO 3 coils are available in 8 different versions, from 0.2 to 1.5 ohm resistance. This means everyone will find the right coil for their taste. Japanese organic cotton ensures sufficient liquid flow and pure taste.
Available coils:
Kanthal 0.2 ohm
Kanthal 0.5 ohm
Kanthal 1.0 ohm
Kanthal 1.5 ohm
Ceramic 0.5 ohm
Ceramic 0.9 ohm
Notch 0.3 ohm
Notch 0.5 ohm
Technical details
Type
Prebuilt Coil Atomizer
Length
55 mm - without DripTip and 510 pin
Tank capacity
4,5 ml
Filling
Top filling (after unscrewing the top cap)
Material
Stainless steel
Pyrex Glass
Atomizer thread
510
DripTip
510 drip tip (visible length: 11 mm; internal diameter: 9 mm (6 mm at the 510 connection); external diameter: 13 mm
Air flow adjustment
Air flow adjustment in the base
maximum: slit, 2x 10 mm * 2,3 mm
minimum: hole, 2x Ø 2 mm
Available coils
Kanthal atomizer heads 0.2 ohm - 0.5 ohm - 1.0 ohm - 1.5 ohm
Notch coil atomizer heads 0.3 ohm - 0.5 ohm
Ceramic coil atomizer heads 0.5 ohm - 0.9 ohm
RBA for your own coil and self-wicking (single coil or dual coil)
Vapor Giant GO 3 - RBA #1 "Single Coil"
With the RBA-adapter you can turn your GO 3 into a rebuildable tank atomizer. The single-coil RBA allows you to install your our coils and wickings with two Phillips screws.
Note: Due to technical reasons the airflow on the RBA-adapter will be a bit tighter compared to the GO 3 prebuild coils.
Vapor Giant GO 3 - RBA #2 "Dual Coil"
With the RBA-adapter #2 you can turn your GO 3 into a rebuildable tank atomizer. The dual-coil RBA allows you to install your own coils and wickings into a classical velocity deck with two poles. Every pole has two holes with an orifice of 2 X 2,3 mm to install your coils. So even claptons and similar coils should fit easily. Allen screws on the side of the poles allow an easy and fast installation of your coils.
Note: Due to technical reasons the airflow on the RBA-adapter will be a bit tighter compared to the GO 3 prebuild coils.
Technical details
Fitting for
Vapor Giant GO 3
Weight
14 g
Material
Stainless steel
